Please wait a minute...
Chinese Journal of Engineering Design  2014, Vol. 21 Issue (3): 259-265    DOI: 10.3785/j.issn. 1006-754X.2014.03.010
    
Dynamic simulation study on pipeline system of liquid snow-melting agent distributor
LI Hai-chao1,2,YAO Yun-shi1,FENG Zhong-xu1
1. Key Laboratory for Highway Construction Technique and Equipment of Ministry Education,Chang′ an University, Xi´an 710064,China;
2. CSR Nanjing Puzhen Rolling Stock Co., Ltd., Nanjing 210031,China
Download: HTML     PDF(2107KB)
Export: BibTeX | EndNote (RIS)      

Abstract  In order to achieve the accurate description of dynamic characteristics of liquid snow-melting agent in pipeline system, and to solve the accuracy control problem in the process of distribution, the model of distribution parameters for the integrated pipeline system of snow-melting agent distributor was established by AMESim platform based on the power bond graph theory according to the operating principle of physical pipeline. The dynamic characteristics analyses showed that the pressure and flow distribution of the pipeline system were lack of uniformity and need to be optimized. The pipeline system showed low pass filtering characteristics, and the pump source signals with frequency above 40 rad/s attenuated soon when that were transmitted to nozzles. The system´s transient and steady-state performance had different sensitivity to different design parameters. The effectiveness of the pipeline system model based on AMESim was proved by comparing the steady-state results of physical experiment and system simulation. The proposed methods and results provide a reliable theory basis for parameters design of the components matching and control in pipeline system of liquid snowmelting agent distributor.

Key wordsdistributor pipeline      dynamic characteristic      power bond graph      modeling      simulation     
Published: 28 June 2014
Cite this article:

LI Hai-chao,YAO Yun-shi,FENG Zhong-xu. Dynamic simulation study on pipeline system of liquid snow-melting agent distributor. Chinese Journal of Engineering Design, 2014, 21(3): 259-265.

URL:

https://www.zjujournals.com/gcsjxb/10.3785/j.issn. 1006-754X.2014.03.010     OR     https://www.zjujournals.com/gcsjxb/Y2014/V21/I3/259


液体融雪剂洒布管路系统动态仿真研究

为了实现液体融雪剂洒布管路系统动态特性的精确描述以解决洒布过程的有效控制问题,根据洒布管路系统工作原理,运用基于功率键合图理论的AMESim软件,建立完整的洒布管路系统分布参数仿真模型进行动特性分析.结果表明:洒布管路压力流量分布均匀性不足,需进行优化;系统呈现低通滤波特性,泵源频率在40 rad/s以上的信号传递至喷口时衰减迅速;系统的瞬态与稳态性能对管路的各影响参数有不同的敏感度.通过物理实验与系统仿真的稳态结果对比,证明了AMESim洒布管路系统模型的有效性.研究所得方法和结论为液体融雪剂洒布管路系统元件匹配的参数化设计及控制调试提供了有力的理论支持.

关键词: 洒布管路,  动态特性,  功率键合图,  建模,  仿真 
[1] Chen WANG,Bo GAO,Xu YANG. Lightweight design of Stewart type six-axis force sensor[J]. Chinese Journal of Engineering Design, 2022, 29(4): 419-429.
[2] Ze-jun WEN,Xiang-heng MENG,Zhao XIAO,Fan ZHANG. Sensitivity analysis of airfoil aerodynamic characteristics based on NT-net method and Morris method[J]. Chinese Journal of Engineering Design, 2022, 29(4): 438-445.
[3] Zhu-xin TIAN,Ming-hui GUO,Hai-yin CAO. Study on influencing factors of dynamic characteristics of annular recess hydrostatic thrust bearing[J]. Chinese Journal of Engineering Design, 2022, 29(4): 456-464.
[4] Fu-qiang ZHAO,Te DU,Bao-yu CHANG,Zhi-gang NIU. Dynamics analysis and experimental research on leg lifting condition of limb-leg crawler foot mechanism[J]. Chinese Journal of Engineering Design, 2022, 29(4): 474-483.
[5] Shao-yu TANG,Jie WU,Hui ZHANG,Bing-bing DENG,Yu-ming HUANG,Hao HUANG. Simulation and experimental research on temperature field of multipole magnetorheological clutch[J]. Chinese Journal of Engineering Design, 2022, 29(4): 484-492.
[6] Ke-jun LI,Min-ya DENG,Wen-jing HUANG,Yu ZHANG,Jia-wang ZENG,Miao-lin CHEN. Study on working characteristics of swing system of concrete wet spraying machine[J]. Chinese Journal of Engineering Design, 2022, 29(4): 519-526.
[7] Yong-de ZHANG,Qing WANG,Wei-feng YANG. Wing docking tolerance allocation based on key measurement features[J]. Chinese Journal of Engineering Design, 2022, 29(3): 300-308.
[8] Wei GAO,Wei ZHANG,Hai-tao GU,Ling-shuai MENG,Hao GAO,Zhi-chao ZHAO. Analysis of motion characteristics of large deep-sea AUV unpowered spiral diving[J]. Chinese Journal of Engineering Design, 2022, 29(3): 370-383.
[9] Xue-jun WANG,Jiang-hua PU,Ming-fang CHEN. Dynamic characteristic analysis of synchronous belt transmission elevator for automatic production line[J]. Chinese Journal of Engineering Design, 2022, 29(2): 212-219.
[10] FAN Xiao-yue, LIU Qi, GUAN Wei, ZHU Yun, CHEN Su-lin, SHEN Bin. Simulation and experimental research on thermal effect of electromagnetic micro hammer peening mechanism[J]. Chinese Journal of Engineering Design, 2022, 29(1): 66-73.
[11] LI Yang, NIE Yu-fei. Design and analysis of heat insulation sealing door of sodium combustion test plant[J]. Chinese Journal of Engineering Design, 2022, 29(1): 115-122.
[12] ZHANG Qin, PANG Ye-zhong, WANG Kai. Simulation analysis and experimental research on robot pedaling weeding process[J]. Chinese Journal of Engineering Design, 2021, 28(6): 709-719.
[13] ZHANG Shen-tong. Analysis of landing load of aircraft landing gear based on virtual prototype technology[J]. Chinese Journal of Engineering Design, 2021, 28(6): 758-763.
[14] CHEN Zhen, XIONG Tao, YANG Yan-qing, XUE Xiao-wei. Sealing performance analysis and structure optimization of sealing ring of soluble ball seat[J]. Chinese Journal of Engineering Design, 2021, 28(6): 720-728.
[15] XIN Chuan-long, ZHENG Rong, YANG Bo. Research on the design and connection control scheme of AUV underwater docking system[J]. Chinese Journal of Engineering Design, 2021, 28(5): 633-645.